1G-22 Fuel System:
Removal
1) Remove fuel tank from vehicle Referring to “Fuel
Tank Removal and Installation: ”
2) Disconnect sub fuel level sensor connector (1).
3) Remove sub fuel level sensor (2).
Installation
Reverse removal procedure for installation noting the
following.
• Replace O-ring with new one using care not to
damage it.
• Apply thin coat of fuel to O-ring, and then install sub
fuel level sensor.
Sub Fuel Level Sensor Inspection
S5JB0A1706027
• Check sub fuel level sensor for damage.
• For inspection of sub fuel sensor (1), refer to “Fuel
Level Sensor Inspection: in Section 9C”
Specifications
Tightening Torque Specifications
S5JB0A1707001
NOTE
The specified tightening torque is also described in the following.
“Fuel System Components: ”
“Fuel Hose Disconnecting and Reconnecting: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fastener Information: in Section 0A”.
2
2
1
I5JB0A171029-01
1
I5JB0A171030-01
Fastening part
Tightening torque
Note
N
⋅
m
kgf-m
lb-ft
Fuel delivery pipe bolt
25
2.5
18.0
)
Fuel pressure regulator bolt
11
1.1
8.0
)
Fuel tank bolt
50
5.0
36.5
)
Fuel filler hose clamp
2
0.2
1.5
)
Fuel pump assembly bolt
11
1.1
8.0
)
www.CarGarage.ir
www.CarGarage.ir
www.CarGarage.ir
