Suzuki Boulevard M50, Service Manual

Page: 275 / 454

COOLING AND LUBRICATION SYSTEM 7-15
• Remove the bearings with the special tool.

09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise condition, bearing removal is not
necessary.

• Remove the mechanical seal with the special tool.

09921-20240: Bearing remover set
NOTE:
If there is no abnormal condition, the mechanical seal removal is
not necessary.

• Remove the oil seal using a suitable bar.
NOTE:
If no abnormal, the oil seal removal is not necessary.

INSPECTION
BEARING
• Inspect the play of the bearing by hand while it is in the water
pump case.
• Rotate the inner race by hand to inspect for abnormal noise
and smooth rotation.
• Replace the bearing if there is anything unusual.
MECHANICAL SEAL
• Visually inspect the mechanical seal for damage, with particu-
lar attention given to the sealing face.
• Replace the mechanical seal that shows indications of leak-
age. Also replace the seal ring if necessary.
The removed bearing must be replaced with a new
one.
The removed mechanical seal must be replaced with a
new one.
The removed oil seal must be replaced with a new one.
SA
MP
LE