Suzuki Boulevard M50, Service Manual

Page: 129 / 454

ENGINE 3-83
• Apply SUZUKI BOND “1216B” to the mating surface of the
cylinder head cover.
• Fit the camshaft end caps
1
.
• Apply grease to the new O-ring
2
and install it. (Front cylin-
der only)
99000-31230: SUZUKI BOND “1216B”

99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Lightly tighten the cylinder head cover bolts diagonally, and
then if everything is satisfactory, tighten securely with a
torque wrench to the specified torque.

Cylinder head cover bolt
(M6): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
(M8): 25 N·m (2.5 kgf-m, 18.0 lb-ft)
NOTE:
When tightening the cylinder head cover bolts, the piston must
be at top dead center on the compression stroke.
(

3-12 and -13)
1216
1216
1216
FWD
FRONT REAR
SA
MP
LE