Suzuki Boulevard M50, Service Manual

Page: 307 / 454

CHASSIS 8-27
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
* Handlebars distortion
* Race wear and brinelling
* Bearing wear or damage
* Abnormal noise of bearing
If any abnormal points are found, replace defective parts with
the new ones.
• Remove the steering stem lower bearing inner race with a
chisel.

• Drive out the steering stem bearing outer races (upper and
lower) using the steel rod.

REASSEMBLY AND REMOUNTING
Reassemble and remount the steering stem in the reverse order
of removal and disassembly. Pay attention to the following
points:
OUTER RACE
• Press in the upper and lower bearing outer races with the
special tools.

09941-34513: Steering outer race installer set
INNER RACE
• Press in the lower bearing inner race with the special tool.

09941-74911: Steering bearing installer
The removed bearing outer race must be replaced with
a new one.
The removed bearing outer race must be replaced with
a new one.
SA
MP
LE