Suzuki Boulevard M50, Service Manual

Page: 115 / 454

ENGINE 3-69
• Tighten the secondary driven bevel gear bolt to the specified
torque.
NOTE:
* Hollow portion
E
of the secondary driven gear assembly faces
inside.
* Apply a small quantity of THREAD LOCK SUPER “1303” to the
bolt.

99000-32030: THREAD LOCK SUPER “1303”

Secondary driven bevel gear bolt:
23 N·m (2.3 kgf-m, 16.5 lb-ft)
DRIVESHAFT BOLT/SECONDARY DRIVEN GEAR SHAFT
NUT
• Install the universal joint on the secondary driven gear shaft.
• While holding the universal joint with a adjustable wrench,
tighten the secondary drive gear shaft nut
1
and driveshaft
bolt
2
to the specified torque.


Secondary drive gear shaft nut:
105 N·m (10.5 kgf-m, 76.0 lb-ft)
Driveshaft bolt: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
WATER PUMP
• Install the new O-ring and new gasket.
• Tighten the water pump mounting screws.

NOTE:
Apply grease to the O-ring.

99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
Driveshaft bolt
2
has left-hand thread.
Use the new O-ring to prevent oil leakage.
SA
MP
LE