Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
34 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
In a case that all of the complementary functions are disabled, device starts working according to the jamming
mode (JAM_DET mode) after detecting the jamming. In such a case, a false detection might be made in an
area having a weak GSM connectivity or in an area having a strong radio.
4-11. Telemetry parameters
This table shows how to set the parameters related with telemetry. In order to set these parameters properly, read
carefully the contents and <Example> along with <Note> described in the bottom inside the table below. In setting
a new device, the
‘New Parameter Setting
‘section available in the ‘SyncTrak’ program will show you detailed
explanation on how to set parameters relating to these
‘Fields’.
HDR DEV_ID
VER
TRAVEL_EVT
ODO_USE
ODO_UNIT
RPM_UNIT
ECO_MAX_RPM
ECO_MIN_RPM
MAX_RPM
DID_OUT_CTRL
MASTER_ADD
MASTER_REMOVE
CHK_GEAR
CHK_GEAR_TIME
CHK_GEAR_RPM
MAX_REST_TIME
MAX_STOP_TIME
Field
Marks
Value
Meaning
HDR
“ST300HTP”
Command type.
DEV_ID
9 char
Device ID.
VER
“02”
Protocol Version.
TRAVEL_EVT
String
‘0’ or ‘1’
0: Does not send
‘travel event’ string.
1:Send
‘travel event’ string when the vehicle is parked.
ODO_USE
String
‘0’ or ‘1’
0:UseGPS to report speed and distance.
1:Useodometer to report speed and distance.
ODO_UNIT
String
Pulse
Number of pulse per km (kilo meter)
If the field is "A", ODO_UNIT should be calibrated by the
installer. Refer to 9-10 of this document about odometer
calibration.
RPM_UNIT
String
pulse
Number of pulse per1000RPM
If the field is "A", RPM_UNIT should be calibrated by the
installer. Refer to 9-10 of this document about RPM
calibration.
ECO_MAX_RPM
String
RPM
Maximum RPM of economic range.
ECO_MIN_RPM
String
RPM
Minimum RPM of economic range.
MAX_RPM
String
RPM
Maximum PRM
When RPM of vehicle exceeds the MAX_RPM, the device
counts this time and reports in travel event string.
DID_OUT_CTRL
String
‘0’ ~’4
Output control by Driver ID
Out 1
Out 2
‘0’
X
X
‘1’
O
O
‘2’
X
O
‘3’
O
X
‘O’: It means the output is activated automatically when the
vehicle starts being driven (ignition on) without the registered
driver ID.
