Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
111 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
7-19. Request information about RPM value
● Definition: How to request to send information about RPM value
Field
Definitions
Value
Meaning
CMD_ID
“ReqRPMU”
Request RPM unit (pulse/second of 1000RPM).
<Example>
[command] ST300CMD;850000;02;ReqRPMU
[response] In case that RPM_UNIT of telemetric setting parameter is set to
“A”.
ST300CMD;Res;100850000;267;ReqRPMU;A (if not calibrated yet)
ST300CMD;Res;100850000;267;ReqRPMU;A;12500 (if calibrated)
In case that RPM_UNIT of telemetric setting parameter was set with value.
SA200CMD;Res; 100850000;267;ReqRPMU;12500
<Note>
This command is used only on the model that has RPM line (ST300H).
7-20. Request information about Odometer value
● Definition: Request information about odometer value
Field
Definition
Value
Meaning
CMD_ID
“ReqOdoU”
Request Odometer value (pulse per 1km).
<Example>
[command] ST300CMD;100850000;02;ReqOdoU
[response] In case that ODO_UNIT of telemetric setting parameter is set to
“A”.
ST300CMD;Res;100850000;267;ReqOdoU;A (if not calibrated yet)
ST300CMD;Res;100850000;267;ReqOdoU;A;12500 (if calibrated)
ST300CMD;Res;850000;267;ReqOdoU;A;12500;6250 (if calibrated with dual type)
In case that ODO_UNIT of telemetric setting parameter was set with value.
SA200CMD;Res;100850000;267;ReqOdoU;12500
<Note>
In case of big truck, the vehicle may have dual gear system and may be changed odometer unit (pulse per 1km
distance). When ODO_UNIT is set to
“auto”, the device can recognize these dual situations automatically and
can apply different value depending on dual situations as calculating speed and moving distance.
This command is used only on the model that has RPM line (ST300H).
7-21. Request Driver ID
● Definition: Request current inserted driver ID.
Field
Definitions
Value
Meaning
CMD_ID
“ReqDriverID”
Request inserted driver ID.
<example>
[command] ST300CMD;;02;ReqDriverID
[response]ST300CMD;Res;100850000;267;ReqDriverID;0100004E160000
SA200CMD;Res;100850000;267;NoDriverID
<note>
This command is used only on the model that has RPM line (ST300H).
