Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
15 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
T2
String
Sec
Interval to be set to send a Status Report in driving mode:
Range: 0 ~ 60000.
If 0, a report in driving will be sent only one time when
vehicle starts driving.
T3
String
Sec
Interval to be set to send a Status Report in emergency
mode:
Range: 0 ~ 9999.
If 0, an emergency report will be sent only one time when an
emergency state occurs.
A1
String
Number of attempts to send an emergency report until the
device gets acknowledgement from the server:
If 0, no Emergency Report will be sent.
If 65500, unlimited report until get ACK from Server.
SND_DIST
String
Meter
Distance interval to be set when the device sends a Status
Report:
Range: 0 ~ 60000 (60km).
If 0, a Status Report on traveled distance is disabled.
If not 0, a Status Report is sent when traveled distance
reaches the predefined SND_DIST.
T4
String
Sec
Interval to be set to send the Keep Alive string.
SMS_T1
String
Min
Interval to be set to send a Status Report in parking mode.
SMS_T2
String
Min
Interval to be set to send a Status Report in driving mode.
SMS_PACK_NO
String
Report No in one SMS message.
<Example>
[command] ST300RPT;100850000;02;180;120;60;3;0;0;0;0;0
[response] ST300RPT;Res;100850000;010;180;120;60;3;0;0;0;0;0
<Note>:
** If a reporting interval is set with a big number, the network may disconnect GPRS connection because GPRS
communication does not make a progress for a long time. So, the device may not receive the command via
GPRS
. “T4” will be used to prevent such a disconnection by sending a short data for short time.
** The
‘Keep Alive’ report is sent only when the device has no data to be sent for the time of the interval ‘T4’.
