Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
29 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
4-9. Additional Parameters (TCP/UDP Parameters)
In order to set these parameters properly, read carefully the contents and <Example> along with <Note> described
in the bottom inside the table below. In setting a new device, the
‘Additional Parameter
‘section available in the
‘SyncTrak’ program will show you detailed explanation on how to set parameters relating to these ‘Fields’.
HDR
DEV_ID
VER
SVR_TYPE
B_SVR_TYPE
UDP_ACK
DEV_PORT
Reserved
SAT_OUT
SAT_DELAY
SAT_RS232
Reserved
Reserved
Field
Marks
Value
Meaning
HDR
“ST300ADP”
Command type.
DEV_ID
9 char
Device ID.
VER
“02”
Protocol Version.
SVR_TYPE
‘T’ / ‘U’
Server Protocol Type:
T: TCP.
U: UDP.
B_SVR_TYPE
‘T’ / ‘U’
Backup Server Protocol Type:
T: TCP.
U: UDP.
UDP_ACK
‘0’ ~ ‘3’
‘ACK’ from the server when UPD is used:
0: No Use.
1: ACK (
‘ACKnowledgement’ to be made by the server right
after receiving a report from the device) when the server
receives reports except ‘Alive’.
2
: ACK when the server receives reports except ‘STT (Status)
Report ‘and ‘Alive Report’.
3: ACK when the server receives an
‘emergency report’.
‘Command response doesn’t need ACK.
DEV_PORT
String
It is a port of the device for receiving commands from the
server via UDP.
It can be used only when UDP server is used.
If
‘0’ or empty, the device would use port 9000.
If not zero, the device can receive commands through the port,
DEV_PORT.
No Used
‘0’
Should be
‘0’.
SAT_OUT
‘0’~’4’
Output control for satellite modem can detect the situation of
‘no GSM’.
0 = Disable.
1 ~ 4 = Enable satellite if lost GSM signal.
SATELLITE
OUT 1
OUT 2
‘1’
X
X
‘2’
O
X
‘3’
X
O
‘4’
O
O
