SunTech ST300 Series, Operation Manual

Page: 23 / 146

Doc. Title Author Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
23 of 146
Concerning Doc. No. Rev. Date
Features and How to set parameters 1.41
26 May. 2015
Suntech International Ltd. Confidential Document
4-4. GSM Parameters for SMS messaging / phone calling
In order to set these parameters properly, read carefully the contents and <Example> along with <Note> described
in the bottom inside the table below.
HDR DEV_ID VER SMS_LOCK SMS_MT1 SMS_MT2 SMS_MT3
SMS_MT4 IN_CALL_LOCK CALL_MT1 CALL_MT2 CALL_MT3 CALL_MT4 CALL_MT5
CALL_MO1 CALL_MO2
Field Marks Value Meaning
HDR
“ST300GSM”
Command type.
DEV_ID 9 char Device ID.
VER
“02”
Protocol Version.
SMS_LOCK
‘0’ or ‘1’
Lock of Receiving Commands by SMS
Disable (0) / Enable (1)
If enabled, only the commands which have been
received from SMS_MT1 ~ MT3, their number(s) can be
accepted.
SMS_MT1 String Up to 20 char. Phone number for SMS commands.
SMS_MT2 String Up to 20 char. Phone number for SMS commands.
SMS_MT3 String Up to 20 char. Phone number for SMS commands.
SMS_MT4 String Up to 20 char. Phone number for SMS commands.
IN_CALL_LOCK
‘0’ or ‘1’
Lock of Incoming Call
Disable (0) / Enable (1).
If enabled, only a call which have been received from
CALL_MT1 ~ MT5 numbers can be accepted.
CALL_MT1 String Up to 20 char. Phone number for calling.
CALL_MT2 String Up to 20 char. Phone number for calling.
CALL_MT3 String Up to 20 char. Phone number for calling.
CALL_MT4 String Up to 20 char. Phone number for calling.
CALL_MT5 String Up to 20 char. Phone number for calling.
CALL_MO1 String Up to 20 char. Phone number for outgoing call from device.
CALL_MO2 String Up to 20 char. Phone number for outgoing call from device.
<Example>
[command] ST300GSM;100850000;02;0;;;;;0;;;;;;;
[response] ST300GSM;Res;100850000;010;0;;;;;0;;;;;;;
<Note>
** When SMS or Call numbers are not set, that field should be empty.