Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
28 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
4-8. Circular geo-fencing parameters
This table shows how a device user can set parameters for circular geo-fencing. In order to set these parameters
properly, read carefully the contents and <Example> along with <Note> described in the bottom inside the table
below. In setting a new device, the
‘SyncTrak’ will show you detailed explanation on how to set parameters relating
to these
‘Fields’.
HDR DEV_ID VER GEO_ID ACTIVE LAT LON RADIUS IN OUT IN_ACT OUT_ACT
Field
Marks
Value
Meaning
HDR
“ST300CGF”
Command type.
DEV_ID
9 char
Device ID.
VER
“02”
Protocol Version.
GEO_ID
‘1’ ~ ‘200’
Geo-fence ID.
ACTIVE
‘0’ or ‘1’
Enable (1) or disable (0).
LAT
String
Central latitude of circular area.
LON
String
Central longitude of circular area.
RADIUS
String
meter
Radius of circular area:
Range: 30~65,000.
IN
‘0’ or ‘1’
Alert that a vehicle enters into the circular area.
Enable (1) or disable (0).
OUT
‘0’ or ‘1’
Alert that a vehicle goes out from the circular area.
Enable (1) or disable (0).
<Example>
[command] ST300CGF;100850000;02;1;1;+37.127.000000;50;1;1
[response] ST300CGF;Res;100850000;010;1;1;+37.127.000000;50;1;1
<Observation>
If sending only
“HDR/DEV_ID/VER/GEO_ID_ACTIVATE/LAT/LON/RADIUS/IN/OUT”, the device will
automatically set the “IN_ACT” and “OUT_ACT” to “0”.
