Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
86 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
MSG_TYPE
0x01
“1”
RPM
0x06, 0xD6
“1750”, MSB
DID
0x01 0x24 0x97 0xF1 0x16 0x000x00
“012497F1160000”
DID_REG
0x01
“1”
ETX
0x03
<Note>
ALERT_ID 3, 4, and 8 are applicable to the device that has an external GPS antenna.
ALERT_ID 13 may be reported if the Back-up Battery cannot be charged or cannot be supported for long time
enough in case the Main Power source (vehicle
’s battery) is disconnected.
ALERT_ID 46,47, 48 and 49 are optional functions to analyze the
‘Driver Pattern’.
ALERT_ID 59 and 60 are applicable to the device that has I-Button event line.
From ALERT_ID 61 to 67 are applicable only to ST300H.
From ALERT_ID 22 to 28 are applicable only to ST300C or ST300K
ALERT_ID 28 : It
’s attached a field for error code in front of the field of alert as below. Otherwise it’s omitted.
DTC CODE : 0x01020304 ( SPN1(0x01)+ SPN2(0x02)+SPN3&FMI(0x03)+CM&OC(0x04)
ALERT_ID 73 is applicable only to ST300F.
Some fields at the end of the report would be different. It depends on device model of ST300 Series. For
example,
The “RPM” is included in STT in ST300H.
The “DID/DID_REG” is included in STT only in ST300H, 300A and ST300K.
“TO”, “TF” and “VS” are included in STT only in ST300C or ST300K.
“FUEL1” and “FUEL2” are included in STT only in ST300F.
The
“TEPERATURE” is included in STT only in ST300A and ST300K.
