SunTech ST300 Series, Operation Manual

Page: 13 / 146

Doc. Title Author Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
13 of 146
Concerning Doc. No. Rev. Date
Features and How to set parameters 1.41
26 May. 2015
Suntech International Ltd. Confidential Document
4. Configuration
Before a device starts being operated, its parameters should be set first. This
chapter shows the string to be sent to
device.
There are 3 options of sending string.
Option 1: by using PC.
Option 2: by using GSM/GPRS network.
Option 3: by messaging via SMS.
In practice, configuration can be made more efficiently with
‘SyncTrak’, i.e. a setting tool provided by Suntech.
Once a device receives a command from the server, it gets back to the server with a relevant response. Device
also changes some parameters (if it is required to do so) or takes an action as instructed below as per the
command sent by the server.
4-1. Network parameters
The following table shows how and what parameters are required to be set so that the device can be connected
with network. As shown in the bottom part of this table, an
‘<Example>’ of ‘[command]’ and ‘[response]’are made in
string respectively when the configuration for the networking is completed.
HDR DEV_ID VER AUTH APN USER_ID USER_PWD SEVER_IP SEVER_PORT
B_SEVER_IP B_SEVER_IP SMS_NO PIN_NO
Field Marks Value Meaning
HDR
“ST300NTW”
Command type of Header.
DEV_ID 9 char Device ID.
VER
“02”
Protocol Version.
AUTH
‘0’/‘1’/’A’
GPRS authentication:
0: PAP(
‘NO’ in ‘SyncTrak’).
1: CHAP(
‘YES’in‘SyncTrak’).
A: Automatic GPRS set.
In this case, parameters for APN, USER_ID and
USER_PWD field should remain empty.
APN String Access Point Name.
USER_ID String ID for GPRS Access.
USER_PWD String Password for GPRS Access.
SEVER_IP String Server IP Address.
SEVER_PORT String Server Port.
B_SEVER_IP String IP Address of Backup Server.
B_SEVER_PORT String Port of Backup Server.
SMS_NO String Phone number that will receive the SMS report sent by the
device.
This can be used for backup in the area where GPRS
condition is not good. Or, it can be used as a main report
receiver when IP and Port are unavailable.If it is not used, it
should remain empty.
PIN_NO String PIN Number to release PIN lock if it is enabled.