Doc. Title
Author
Page of Pages
ST300/340 OPERATION MANUAL
– LATAM
HG.Park
14 of 146
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.41
26 May. 2015
Suntech International Ltd.
Confidential Document
<Example>
[command] ST300NTW;100850000;02;0;internet;;;111.111.111.111;8600;;;;
[response] ST300NTW;Res;100850000;010;0;internet;;; 111.111.111.111;8600;;;;
ST300NTW;Res;100850000;010;
A1;tim.br;tim;tim
; 111.111.111.111;8600;;;;
<Note>:
** If network does not require User ID and Password, these fields should remain empty.
Automatic Setting for GPRS Network
If you set the device to
‘Automatic GPRS Set’, the device will automatically set the parameters for GPRS with
the data available on the inserted SIM card.
For instance, if Airtel SIM is inserted, the device will set
‘AUTH’ to ‘0’, ‘APN’ to ‘airtelgprs.com’, ‘USER_ID and
USER_PASS
’ to empty respectively.
And then, the device reports response string after adding real GPRS parameters, if
‘Automatic GPRS Set’ is
selected.
DNS
SERVER_IP and B_SERVER_IP field can be filled with direct IP address (for example 111.111.111.111) or
domain name (for example, suntechint.com). If this field is written by domain, the device will find real IP address
by DNS and sends reports to IP address.
4-2. Reporting parameters
Device responds to the command(s) with the relevant report or response periodically at a time interval or at a
travelled distance interval of the vehicle that has already been predefined by user. Such are response sent back to
the server includes SMS message (if the device user has already configured SMS messaging functionality). The
following table shows how to set those parameters.
In bottom part of the table, the following table also shows how and what parameters should be set to utilize
functions like:
‘Angle Report’, that is used for displaying the historic path more accurately or saving network cost while
the vehicle is driving on straight roads for long time.
‘FIFO’ or ‘LIFO’, should be selected to determine a sequential order if buffer of the device is completely full
of reports. For more information, take a look at the description made in the bottom part of the table below.
HDR DEV_ID
VER
T1
T2
T3
A1
SND_DIST
T4
SMS_T1
SMS_T2
SMS_PACK_NO
Field
Marks
Value
Meaning
HDR
“ST300RPT”
Command type.
DEV_ID
9 char
Device ID.
VER
“02”
Protocol Version.
T1
String
Sec
Interval to be set to send a Status Report in parking mode:
Range: 0 ~ 86400.
If 0, a report in parking will be sent only one time when
vehicle starts being parked.