BT-Q816
Super 51-CH Performance Bluetooth GPS Receiver
BT-Q816 Quick Installation Guide
Thank you for purchasing Qstarz BT-Q816 51-Channel Bluetooth GPS Receiver. It provides 25 hours of
navigation and supports Smart Power control for power saving.
Main features:
z
Adopt MTK chipset with high sensitivity to -158dBm
z
Up to 25hrs operating time for GPS navigation
z
51-Channel Performance tracking for fast acquisition and reacquisition
z
Fast Position Fix ,Cold start 36s, Warn start 33s,Hot start 1s
z
Vehicle tracking & Location base services
z
Smart power control – Auto On-Off function
z
Compatible with Bluetooth Serial Port Profile (SPP) in 15m wirelessly
A. Standard Package
GPS Unit BT-Q816 (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Optional Travel Charger (4) + Warranty Card +
Quick Installation Guide.
NOTE: The Cigarette Adaptor can only be used to charge BT-Q816. Please don’t make use of it with devices other than BT-Q816.
1. 2. 3. 4. (Optional)
B. Appearance
1. Power jack (mini USB type)
2. Power switch
3. Battery status LED (Red/Green)
4. Bluetooth status LED (Blue)
5. GPS status LED (Orange)
6. Internal antenna
C. Battery installation
C-1 Put Battery in place:
Press the
PUSH
button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in the
unit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4).
1. 2. 3. 4.
C-2 Take Battery out:
Press the
PUSH
button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out the
battery from the unit (3).
1. 2. 3.
D. Charging your battery
1
For the first time using the BT-Q816, please charge battery until it is fully
charged. Take the power cable and connect it to the power jack (mini USB
type) and recharge through travel charger or car cigarette adaptor. This will
begin to charge the battery. Charging time is 3 hours typically.
- When the Power LED is Red, battery power is low status. Please recharge.
- When the Power LED is Green, the battery is under charging mode.
- When the Power LED is blinking, the battery is fully charged.
1
６
２
４
３
５
