SunStar SSP-WE/3.5, Instruction Manual

Page: 98 / 158

98
■ ■
Making 2-Step Stitch
①
Create sewing data of ZigZag or gen-
eral stitch type on editing screen. This
description gave ZigZag stitch as an
example. Next figure is general ZigZag
stitch prior to applying 2-Step stitch.
Also, If you select and
apply
“
2-Step Stitch
”
button from measure-
ment tool bar, you can see that one stitch is add-
ed between ZigZag stitch and stitch and so a
ZigZag stitch is created as shown in the following
figure.
②
If you select
“
Editing
”
on top of menu, you can
see
“
2-Step Stitch
”
in the bottommost.
Making 2-Step Stitch is the function to add one stitch between stitch and
stitch.
It can apply to all existing Zigzag or general stitch.
Application procedure is as described below.
In such case as above, we applied 2-Step Stitch to ZigZag that has configuration
data. If you m
mo ovvee sseeg gm meen ntt o off cco on nffiig gu urraattiio on n d daattaa,, yyo ou u ccaan n ccrreeaattee Z Ziig gZ Zaag g
aag gaaiin n aacccco orrd diin ng g tto o tth hee cch haan ng geed d cco on nffiig gu urraattiio on n d daattaa.. T Th heerreeffo orree,, eexxiissttiin ng g
aap pp plliieed d 2 2--S Stteep p ssttiittcch h b beecco om meess tto o d diissaap pp peeaarr..
Please remember this. Otherwise, if it is point stitch without configuration data, it
cannot change as configuration data.
Reference