SunStar SSP-WE/3.5 Instruction Manual Download Page 40

Page: 40 / 158

The order of

①

②

, and

③

are same. Arc and Circle of

④

are composed of three points. Therefore two points are
displayed like Spline. However upon adding one point,
the lines are automatically connected at each point and
create Arc/Circle.

How to input Polygon is same to that of Line.
However, Polygon is a closed loop. Therefore, upon
clicking the mouse

’

s right button to finish inputting, first

point and last point are automatically connected.

The basic creation is same to that of Spline. Upon the
right button finally, it is created absolutely identical
with Polygon.

The following screen shows all configuration data created previously.

Input Arc/Cricle

Input Polygon

Input Closed Spline

Summary of Contents for SSP-WE/3.5































































































































































Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands

SunStar SSP-WE/3.5, Instruction Manual

Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands