SunStar SSP-WE/3.5, Instruction Manual, Page: 101 / 158

101
■ ■ S Seettttiin ng g sseelleeccttiio on n aarreeaa o off sseew wiin ng g d daattaa
①
In menu, select
“
sewing data selection
area setting
”
, a sub-level menu under
“
sewing setting
”
.
Set up the area to automatically select the data during sewing data selection
②
After selecting, you will see the dialog
box like the following. The current value
is the default value.
SEWING POINT
SELECT RANGE
Sewing data selection area: If the value of this area increases, the selection
area of the sewing data will expand. Just bring the mouse near the sewing
data point and click to automatically select the sewing data. Contrariwise,
carefully select the sewing data to reduce the value of this area.
Sewing point selection area: The value
of the sewing point selection area works
similarly to
“
sewing data selection
area
”
, only that this function is designed
to select the sewing point. Increase the
set-up value to select the closest point.
As illustrated here, the area where
sewing point can be automatically
selected in line with the set-up value will
be determined. Select as desired
accordingly. To edit delicate and fine
points, set
“
0
”
for both sewing data
selection range and sewing point
selection.