SunStar SSP-WE/3.5, Instruction Manual, Page: 27 / 158

27
Input Line
Input Arc
Input Polygon
Input Circle
Input Spline
Input Closed Spline
Add Point
Delete Point
Move Point
Divide Element
Offset Element
Delete
Configuration Data
Input data more than two points to create
a straight line.
Input data more than three points to
create an arc.
Input data more than three points to
create a polygon.
Input data more than three points to
create a circle.
Input data more than two points to create
a spline.
Input data more than three points to
create a closed spline.
Add one point of configuration data.
Delete one point of configuration data.
Move one point of configuration data.
Divide the selected configuration data on
the basis of joints.
Position and create configuration data in a
constant interval.
Data Delete the selected configuration
data.
This is a tool bar which have functions to actually create sewing data based on the
configuration data input above: Point Stitching to input stitch by stitch, Normal
Stitching to create general sewing data, Zigzag Stitching to create zigzag sewing
data, Inverse Stitching to create more several times of the sewing data inversely,
Multi Stitching to create several sewing data in a time with the Offset function, and
Delete to delete the created sewing data. These all processes are executed under
the condition that configuration data or sewing data are selected.
· ·
Sewing Tool Bar