SunStar SSP-WE/3.5 Instruction Manual Download Page 94

Page: 94 / 158

③

Click

“

”

to enlarge the selected configuration

and sewing data.

④

Reduce with the same method as the above.

①

Select configuration and sewing data to rotate.

Rotation

Rotate the selected configuration and sewing data.

②

Select Rotation to display Rotation Dialog.
The selected pattern is displayed to the whole
range with dotted lines as shown in the figure.

The Rotation Dialog includes the following
functions:

Rotation of whole pattern

: Rotate the whole

pattern completely.

Rotation of Specified elements(range)

Rotate only the selected configuration data or
sewing data.

Angle

: Input the rotation angle.

No(Origin or center)

: Rotate based on the

selected data.

Yes

: Rotate based on any position selected by

a user.

Summary of Contents for SSP-WE/3.5































































































































































Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands

SunStar SSP-WE/3.5, Instruction Manual

Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands