149
③
Input
“
Test.bin
”
in the Output File Name input box. And click the Select Pattern File
button.
④
The following Dialog Box is displayed. Open the directory where pattern files are
saved in the Dialog Box, and select the pattern files. Up to 67 pattern files can be
selected at a time. And select pattern files with the mouse
’
s left button under
pressing the
“
Ctrl
”
button in the keyboard to select multi pattern files as shown in
the Figure
The BarTack file has Binary type to record ROM files with SSP-Writer(Rom
Writer). The machine for BarTack provides various designs through ROM,
therefore it must always convert them into Binary files. It is desirable to
write extension names in advance because their extension names have to
be
“*.bin”upon writing.
⑤
Select
“
Open
”
, and press in the Dialog Box. If the file is succe-
ssfully converted, the following message is displayed.
⑥
The converted file is located where the file opened.
When the *.bin file (converted and generated as in the above) is written on ROM,
it can be used as an extension pattern. In the case of SSP-1201 (Bartack),
those basic patterns number 33 and above following numbers 1 through 32 can
be used as extension patterns. And in the case of SPS-1202 (Button Sewer),
those basic patterns number 34 and above following numbers 1 through 33 can
be used as extension patterns. When the *.bin file is generated, the brtk.bin file
is also generated, which stores information but has nothing to do with the actual
extension pattern data.
Summary of Contents for SSP-WE/3.5
