SunStar SSP-WE/3.5 Instruction Manual Download Page 97

Page: 97 / 158

■

Min-Max. Sewing Range

■

Measurement (Point to Point)

①

Sewing data should exist in the edit range.

②

Select Min/Max Sewing Range on the upper
of the menu.

③

Min-Max Range Dialog is displayed. You can
easily find the max-min range of sewing data
through the range dialog.

Display the max-min range of sewing data in the edit range.

①

Select

“

Measure

”

on the upper of the menu, or

“

Measurement(Point to Point)

”

on the

Measure tool bar. The selected button gets conc-
aved.

②

Select the first sewing data joint to measure with

the mouse

’

s left button. The selected joint shows

in a dark circle as shown in the figure.

③

Continuously select the second joint. It also shows

in a dark circle as shown in the figure.

④

If the figure above is displayed, click the mouse

’

right button. The selected dark circle disappears,
and the measured value between two stitches is
displayed on the Stitch Length in the upper-right
of Information Tool Bar.

Measure the distance between two stitch points.

Summary of Contents for SSP-WE/3.5































































































































































Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands

SunStar SSP-WE/3.5, Instruction Manual

Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands