SunStar SSP-WE/3.5 Instruction Manual Download Page 24

Page: 24 / 158

Provide functions to change the selected configuration and sewing data with various
types.

Measure Tool Bar

Display and select the configuration and sewing data created on the screen. (Upon
edit : Display the sequence of created sewing data points.)

Replay Tool Bar

Enlarge/Reduce

Move

Rotation

Mirror

Stitch Off

Stitch On

Ruler

Info

Enlarge / reduce the selected pattern
data.

Move the selected pattern data.

Rotate the selected pattern data.

Inversely rotate the selected pattern data.

Hide all stitch points on the screen.

Display again all hidden stitch points on
the screen.

Measure the distance between two
stitches.

Show the selected configuration and
sewing data information.

2-Step Stitch

Create a stitch between stitches.

First Pointer

Previous Pointer

Next Pointer

Last Pointer

Select the first data group.
(Edit : Move to the first point.)

Select the previous data group.
(Edit:Move to the previous point.)

Select the next data group.
(Edit: Move to the next point.)

Select the last data group.
(Edit : Move to the last point.)

Summary of Contents for SSP-WE/3.5































































































































































Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands

SunStar SSP-WE/3.5, Instruction Manual

Search results

Summary of Contents for SSP-WE/3.5

Reviews:

Related manuals for SSP-WE/3.5

Brands by name

Popular brands