5-46
Sun Fire X4440 Server Service Manual • September 2010
c. While keeping the latch pressed, pull the cable out.
Caution –
Failure to follow this step can result in the cables not being removed, or
damage to the backplane, HBA adapter, or SATA connectors on the motherboard.
3. Remove the HBA card from slot 0. (
FIGURE 5-25
)
See
Section 4.5.2, “Removing PCIe Cards” on page 4-26
.
4. Remove the PCIe card from slot 2, if present, to access the onboard SATA
connector.
Skip this step if no card is present in slot 2.
5. Attach the left cable farthest from the power supply into the onboard SATA
connector 0~3 (SATA #1)
6. Remove all fan modules.
See
Section 3.5.4, “Removing a Fan Module” on page 3-13
.
7. Disconnect the right cable from the drives disk backplane connector.
Remove the cable.
8. Obtain the long cable (PN 530-3892) from the accessory kit.
9. Insert the cable (PN 530-3892) connector fully into the drives disk backplane
connector until it clicks.
Align properly. Rout the cables carefully through the server.
See
Section 1.2.2, “System Cables” on page 1-5
.
10. Place the cable (PN 530-3892) into the on board connector labeled 4-7 (SATA #2).
11. Install all fan modules.
See
Section 3.5.5, “Installing a Fan Module” on page 3-14
.
12. Reinstall the PCIe card into slot 2, if present.
See
Section 4.5.3, “Installing PCIe Cards” on page 4-28
.
13. Install the top cover.
See
Section 6.1, “Installing the Top Cover” on page 6-2
.
14. Install the server into the rack.
See
Section 6.2, “Reinstalling the Server in the Rack” on page 6-3
.
15. Install the drives, as required.
See
Section 3.2.4, “Installing a Drive” on page 3-6
.
16. Return the server to operation.
Summary of Contents for Fire X4440
