Sun Oracle Fire X4440, Service Manual

Page: 157 / 222

Chapter 5 Servicing Infrastructure Boards and Components 5-35
d. Attach an antistatic wrist strap.
See Section 2.8, “Performing Electrostatic Discharge and Antistatic Prevention
Measures” on page 2-10 .
e. Remove the top cover.
See Section 2.9, “Removing the Top Cover” on page 2-12 .
2. Remove the mezzanine tray.
See Section 4.2.1, “Removing the Mezzanine Tray” on page 4-13 .
3. Remove the cables.
a. Press the latch.
b. Push the cable in.
c. While keeping the latch pressed, pull the cable out.
Caution – Failure to follow this step can result in the cables not being removed, or
damage to the backplane, HBA adapter, or SATA connectors on the motherboard.
4. Remove the SAS HBA card and replace it with either PCIe filler or another card.
5. Install the connector labeled
MB 0, 1, 2, and 3
into the motherboard connector
labeled SATA 0.
6. Install the connector labeled MB 4, 5, 6, and 7 into the motherboard connector
labeled SATA 1.
7. Reinstall the mezzanine tray.
See Section 4.2.2, “Installing the Mezzanine Tray” on page 4-14 .
8. Return the server to operation.
a. Install the top cover.
See Section 6.1, “Installing the Top Cover” on page 6-2 .
b. Install the server into the rack.
See Section 6.2, “Reinstalling the Server in the Rack” on page 6-3 .
c. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See Section 6.4, “Powering On the Server” on page 6-6 .
d. Power on the server.
See Section 6.4, “Powering On the Server” on page 6-6 .