5-26
Sun Fire X4440 Server Service Manual • September 2010
9. Route the cable towards the power supply bay, and over the notch in the vertical
power supply unit backplane.
The cable then dips slightly to run underneath the ribs on the Mezzanine Tray
support bracket.
10. Reinstall the mezzanine tray support bracket.
Be careful not to pinch the cable.
11. Install the SAS HBA card in PCIe slot 0.
The lower card on the riser is closest to the power supply wall.
12. Install the connector labeled
MB 0, 1, 2, and 3
into port 0 of the SAS HBA card,
which is closest to the gold fingers.
13. Install the connector labeled
MB 4, 5, 6, and 7
into port 1 of the SAS HBA card,
which is furthest from the gold fingers.
14. Reinstall the fan power boards.
See
Section 5.1.2, “Installing a Fan Power Board” on page 5-4
.
15. Replace the air duct.
See
Section 4.3.2, “Installing the Air Duct” on page 4-18
.
16. Reinstall the Mezzanine Tray.
See
Section 4.2.2, “Installing the Mezzanine Tray” on page 4-14
.
17. Install the fan modules.
See
Section 3.5.5, “Installing a Fan Module” on page 3-14
.
18. Return the server to operation.
a. Install the top cover.
See
Section 6.1, “Installing the Top Cover” on page 6-2
.
b. Install the server into the rack.
See
Section 6.2, “Reinstalling the Server in the Rack” on page 6-3
.
c. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See
Section 6.4, “Powering On the Server” on page 6-6
.
d. Power on the server.
See
Section 6.4, “Powering On the Server” on page 6-6
.
Summary of Contents for Fire X4440
