Sun Oracle Fire X4440, Service Manual

Page: 8 / 222

viii Sun Fire X4440 Server Service Manual • September 2010
5.8.2 Installing Drive Cables into a SAS Configuration 5–25
5.8.3 Removing Drive Cables in a SATA Configuration 5–28
5.8.4 Installing Drive Cables in a SATA Configuration 5–30
5.8.5 Changing Drive Cables From SAS to SATA 5–34
5.8.6 Changing HD Cables From SATA to SAS 5–36
5.8.7 Removing a PDB Cable 5–38
5.8.8 Installing a PDB Cable 5–40
5.9 Configuring Disk Controllers 5–42
5.9.1 Converting a Diskless Server to HBA 5–43
5.9.2 Converting HBA to Onboard SATA 5–45
5.9.3 Converting Onboard SATA to HBA 5–47
6. Returning the Server to Operation 6–1
6.1 Installing the Top Cover 6–2
6.2 Reinstalling the Server in the Rack 6–3
6.3 Returning the Server to the Normal Rack Position 6–4
6.4 Powering On the Server 6–6
A. Connector Pinouts A–1
A.1 Serial Management Port Connector A–2
A.2 Network Management Port Connector A–3
A.3 Video Connector A–4
A.4 USB Connectors A–5
A.5 Gigabit Ethernet Connectors A–6
B. BIOS Power-On Self-Test (POST) Codes B–1
B.1 Introduction B–1
B.2 How BIOS POST Memory Testing Works B–2
B.3 Redirecting Console Output B–2
B.4 Changing POST Options B–3