background image

www.quantum.com

NDX NAS 1U Rack

Quantum NDX NAS 1U Rack 

Installation Guide

This installation guide provides basic installation and configuration 

instructions for the NDX NAS 1U Rack. 
This instruction uses the following conventions:

Note:

Notes emphasize important information related to the main topic.

Caution:

Cautions indicate potential hazards to equipment and are 

included to prevent damage to equipment.

WARNING:

Warnings indicate potential hazards to personal safety and 

are included to prevent injury.

Contents

Preparing for Setup................................2
Precautions.............................................2
Rail Kit Contents.....................................3
Rack Installation.....................................2

Rack Mounting Instructions...............7
Identifying the Sections of the Rack 
Rails ....................................................7
Installing the Inner Rails on the NDX 
1U NAS Server ....................................8
Installing the Outer Rails on the Rack8
Installing the NDX 1U NAS Server into 
a Rack ...............................................11
Installing the NDX 1U NAS Server into 
a Telco Rack ......................................12 
Removing Server from the Rack.......12

Summary of Contents for NDX Series















Reviews: