Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 106 / 298

6-8 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
6
3. Enter the appropriate information in the Basic dialog box and then click
Advanced to display the Advanced dialog box. The following sections
describe the parameters in the Basic and Advanced dialog boxes.
4. To accept the settings, click OK. To exit a dialog box without accepting the
settings, click Cancel. To return to the default settings, click Reset.
Note – QLLC does not support LU6.2.
6.3.1 Basic QLLC Configuration
Line Name
The name that identifies this QLLC line. The name can contain up to eight
alphanumeric characters (including @, #, and $). Tabs and spaces are not
allowed. The first character cannot be a number. You must specify the name of
the QLLC line. The name cannot be the same as any other connection name.
Comment
A free-form text area that you can use to further qualify and describe the name
or provide additional information.
Connection Type
The connection type. The value can be Permanent VC (virtual circuit) or
Switched VC.