Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 115 / 298

Configuring PUs 7-5
7
Figure 7-2 SDLC or QLLC Connection
Group LSAP for PU
A 2-digit hexadecimal string representing the group Service Access Point
(SAP) for this PU. The default is x’05’. This parameter is available only for
LAN connections.
Local LSAP for PU
A 2-digit hexadecimal string representing the SAP for this PU in increments of
x’04’. The default is x’04’. The value must be unique for each PU in the
configuration.
This parameter is available only for LAN connections.
Remote LSAP
A 2-digit hexadecimal string representing the remote LSAP for this PU in
increments of x’04’. The default is x’04’. This value must equal the LSAP of the
remote PU.
This parameter is available only for LAN connections.
Local Terminal ID
An 8-digit hexadecimal string that represents this node. The value can range
from 0 to FFFFFFFF. The default is x’00000000’. The Local Terminal ID consists
of two fields: idblk (first three digits) and idnum (last five digits), where idblk