Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 76 / 298

3-10 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
3
5. In the Line Name field, enter a name for the new QLLC line. The name
can contain up to eight alphanumeric characters (including @, #, and $).
Tabs and spaces are not allowed. The first character cannot be a number.
The name cannot be the same as any other connection name.
6. Typically, you can leave the default settings for the remaining parameters
in the Basic and Advanced dialog boxes. If you want to change any of the
other parameters, refer to Section 6.3, “Adding a QLLC Connection,” on
page 6-7.
7. Click OK to add the new QLLC line.
3.4.5 Adding a PU
▼
To add a PU:
1. In the resource tree, double-click LAN Connections (for Token Ring,
Ethernet, or FDDI connections), SDLC Lines (for SDLC connections), or
QLLC Lines (for QLLC connections) to display the name of the connection
you just added.
2. Click the connection name to select it.
3. From the main window, select Edit
→
New
→
DLC (PU2) to display the
Create DLC dialog box.
Note – The dialog box shown is for a LAN connection. The parameters
available for SDLC, QLLC, and channel connections may vary.