Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 78 / 298

3-12 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
3
4. In the Name field, enter the name for the dependent LU. The name can
contain up to eight alphanumeric characters (including @, #, and $). Tabs
and spaces are not allowed. The first character cannot be a number.
Lowercase letters are converted to uppercase. The name cannot be the
same as any other dependent LU, independent LU, LU pool, or PU name.
5. In the LU Type field, select the dependent LU type. Select LUType 1 for
3770 RJE. Select LUType 2 for 3270 terminal emulation. Select LUType 3
for printing. Select LUType 6.2 for APPC peer-to-peer communications.
Note –
If you are using either an LUType 1 or an LUType 3 for printing, always
select LUType 3.
6. Typically, you can leave the default settings for the remaining parameters
in the Basic and Advanced dialog boxes. If you want to change any of the
other parameters, refer to Chapter 8, “Configuring Dependent LUs."
7. Click OK to add the dependent LU.