Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 211 / 298

Troubleshooting 12-33
12
12.3.1 The SunGMI Does Not Start
If you are using Solaris, the SunGMI will not run unless the Motif Runtime
package is installed and you have the environment variable
LD_LIBRARY_PATH
defined to include the directories that contain the Motif shared libraries. These
directories are normally
/usr/openwin/lib
and
/usr/dt/lib
.
If you see the message
"fatal: libXm.so.3: can't open file: errno=2"
the Motif Runtime package or the environment variable may not be in place.
The Motif Runtime package is included on the Solaris 2.4 CD and can be
installed on Solaris 2.3, 2.4, and 2.5.1.
To set the environment variable, enter the following:
% export LD_LIBRARY_PATH=/usr/openwin/lib:/usr/dt/lib
If you see the message:
"Error: Can't open display"
the X-display from the machine running the SunGMI cannot open a window
on your local workstation. To allow access to your screen, enter the following
from the system console display:
% xhost + machinename
where machinename is the system running the SunGMI. On Solaris,
xhost
is
located in the
/usr/openwin/bin
directory by default.
12.3.2 The SunGMI Cannot Connect to the Running Domain
The manager system that you specified is not currently active, or a manager
network is in place but no primary manager system has been determined. If
the manager network is running, start the
SunGMI
again, connecting to the
TCP hostname that the SunGMAN process is running on by name instead of
by domain. Display the Managers window to see the status of the manager
systems in the manager network. For more information, refer to Section 2.3.2,
“Managers Window,” on page 2-6.