Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 162 / 298

11-2 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
11
11.1.1 Controlling Client Access
By default, any client (user) can access any resource. If required, you can limit
access so that only specific clients can access specific dependent logical units
(LUs) and/or LU pools. To limit access, you define user records and user
groups and then include only those users and/or groups with access to the
resource in the resource’s access list.
For information on setting up:
•
Users and user groups, refer to Chapter 10, “Configuring Users."
•
An access list for a dependent LU, refer to the Access Control definition in
Section 8.1.1, “Basic Dependent LU Configuration,” on page 8-3.
•
An access list for an LU pool, refer to the Access Control definition in
Section 8.4, “Creating an LU Pool,” on page 8-9.
The way the Sun PU2.1 SNA Server determines whether to grant a client access
to the LU depends on whether the client specifies the name of the LU or the
name of the LU pool that the LU is in. Refer to the following flow diagram.