Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 140 / 298

9-8 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
9
▼
To configure a session mode for the LU-LU pair:
1. Double-click the PU2.1 server name to open its subordinate entries.
2. Double-click Partner LU in the resource tree to display a list of partner
LUs.
3. Click the partner LU to select it.
4. From the main window, select Edit
→
New
→
Mode to display the Create
Mode dialog box.
5. Enter the appropriate information in the Basic dialog box and then click
Advanced to display the Advanced dialog box. The following sections
describe the parameters in the Basic and Advanced dialog boxes.
6. To accept the settings, click OK. To exit a dialog box without accepting the
settings, click Cancel. To return to the default settings, click Reset.
9.3.1 Basic Session Mode Configuration
Mode Name
The name of the mode to be used on the LU-LU sessions. The name can
contain up to eight alphanumeric characters (including @, #, and $). Tabs and
spaces are not allowed. The first character cannot be a number. Lowercase
characters are converted to uppercase.
The mode name on the local LU must match the mode name on the partner
LU.