Sun Microsystems SunLink SNA 9.1 PU2.1 Configuration Manual Download Page 93

Page: 93 / 298

5-1

Configuring PU2.1 Servers

This chapter describes how to configure PU2.1 servers.

▼

To configure a PU2.1 server:

1. Double-click Systems in the resource tree to display a list of systems.

2. Double-click the system name in the resource tree to open its subordinate

entries.

3. Using the right mouse button (MB3), click and hold PU2.1 Servers in the

resource tree and select New

→

PU2.1 Server from the popup menu. The

screen displays the Create PU2.1 Server dialog box.

4. Enter the appropriate information in the Basic dialog box and then click

Advanced to display the Advanced dialog box. The following sections
describe the parameters in the Basic and Advanced dialog boxes.

5. To accept the settings, click OK. To exit a dialog box without accepting the

settings, click Cancel. To return to the default settings, click Reset.

Summary of Contents for SunLink SNA 9.1 PU2.1











































































































































































































































































































Search results

Summary of Contents for SunLink SNA 9.1 PU2.1

Reviews:

Related manuals for SunLink SNA 9.1 PU2.1

Brands by name

Popular brands

Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Search results

Summary of Contents for SunLink SNA 9.1 PU2.1

Reviews:

Related manuals for SunLink SNA 9.1 PU2.1

Brands by name

Popular brands