Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 280 / 298

F-14 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
F
If the AS/400 is not configured to automatically create controllers (
LIN(TRLAN)
AUTOCRTCTL=NO
), use the remote control point name on the AS/400 controller
description as the PU2.1 server CP name.
F.4.2 SDLC Connection
The following table lists the Sun PU2.1 SNA Server configuration parameters
that you must coordinate with the AS/400 configuration. If you change any of
these parameters in one configuration, you must make the corresponding
changes in the other configuration.
You must establish values for the following parameters:
•
The AS/400’s remote control point name on the AS/400 controller
description.
•
The AS/400’s remote network identifier (
RMTNETID
), which is the network
name (or
NETID
) field of the network-qualified CP and LU names.
•
The AS/400's default local location name (
LCLLOCNAME
), which corresponds
to the partner LU name. Use the AS/400 display network attributes
(
DSPNETA
) command to determine this value. Make sure that you use the
default local location name value.
Table F-4 PU2.1 SNA Server SLDC Connection Configuration Parameters
Sun Resource Resource Parameter AS/400 Object AS/400 Parameter
PU2.1 server CP Name CTL(APPC) Remote network
identifier
Remote control point
SDLC
connection Line Type
Use NRZI encoding?
Line Speed
Duplex LIN(SDLC) Connection type
NRZI data encoding
Line speed
Duplex
DLC Station Address
Role CTL(APPC) Station address
Data link role
Partner LU Network Qual Name CTL(APPC)
LCLLOCNAME Remote network
identifier
Default local
location name
Session mode Mode Name MODE Mode description