Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 71 / 298

Getting Started 3-5
3
4. In the Host field, enter the hostname of the machine on which you
installed the SunGMAN software.
5. Typically, you can leave the default settings for the remaining parameters.
If you want to change any of the other parameters, refer to Section 11.3.2,
“Adding a Manager System,” on page 11-9.
6. Click OK to add the manager system to the manager network.
3.4.2 Configuring a System
▼
To configure a system:
1. Double-click the configuration you are using to display the resource
window.
2. Click Systems in the resource tree to select it.
If this is a new installation or if, during the installation procedure, you
specified that you wanted to run the manager system as the primary
manager system in your manager network, an entry for the local system is
automatically created. Go to the next section to add a PU2.1 server to the
system.
If you must create a new system, go to step 3.
3. From the main window, select Edit
→
New
→
System to display the Create
System dialog box.
4. In the Host field, enter the hostname of the system on which you installed
the Sun PU2.1 SNA Server.