Sun Microsystems SunLink SNA 9.1 PU2.1 Configuration Manual Download Page 134

Page: 134 / 298

9-2

SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997

9.1 Configuring an Independent LU

▼

To configure an independent LU:

1. Double-click Systems in the resource tree to display a list of systems.

2. Double-click the system name to open its subordinate entries.

3. Double-click PU2.1 Servers to display a list of servers.

4. Double-click the PU2.1 server name to open its subordinate entries.

5. From the main window, select Edit

→

New

→

Independent LU to display

the Create Independent LU dialog box.

6. Enter the appropriate information in the Basic dialog box and then click

Advanced to display the Advanced dialog box. The following sections
describe the parameters in the Basic and Advanced dialog boxes.

7. To accept the settings, click OK. To exit a dialog box without accepting the

settings, click Cancel. To return to the default settings, click Reset.

9.1.1 Basic Independent LU Configuration

Summary of Contents for SunLink SNA 9.1 PU2.1











































































































































































































































































































Search results

Summary of Contents for SunLink SNA 9.1 PU2.1

Reviews:

Related manuals for SunLink SNA 9.1 PU2.1

Brands by name

Popular brands

Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Search results

Summary of Contents for SunLink SNA 9.1 PU2.1

Reviews:

Related manuals for SunLink SNA 9.1 PU2.1

Brands by name

Popular brands