Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 196 / 298

12-18 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
12
3. Enter the following information:
Host
The hostname of the remote server system. You should not have to change this
field.
Working Directory
The directory on the remote host where the Sunscope utility is located. During
installation, the utility is placed in
/opt/SUNWgmi
.
Device
The target device name. For LAN and SDLC connections, this value defaults to
the Device name specified for the connection. For more information, refer to
Section 6.1, “Adding a LAN Connection,” on page 6-1 (for LAN connections)
or Section 6.2.1, “Basic SDLC Configuration,” on page 6-5 (for SDLC
connections). You should not have to change this field.
Output Log File
The name of the local file where you want to log the output of the Sunscope
utility. If you do not enter a file name, the data is displayed only on the screen.
Note – Output log files can grow very quickly, so choose a file system with
sufficient free space.