Sun Microsystems SunLink SNA 9.1 PU2.1 Configuration Manual Download Page 191

Page: 191 / 298

Troubleshooting

12-13

Dependent
LU (cont.)

luSessStartTime

The time the LU-LU session was
activated.

luAvailStatus

Indicates whether the dependent LU is
currently available for administrative
purposes.

luUserName

The name of the user currently
attached to the dependent LU.

luNetAddrType

The network address type of the client
currently attached to the dependent
LU.

luNetAddr

The network address of the client
currently attached to the dependent
LU.

LU pools

poolName

The name of the LU pool.

poolOperStatus

Not applicable.

poolConfigStatus

The current configuration status of the
LU pool. The value can be Default,
Added, Modified, or Deleted.

poolTotalLUs

The total number of LUs configured
in this pool.

poolAvailLUs

The number of LUs in the pool that do
not have an attached client.

poolInUseLUs

The number of LUs in the pool that
have an attached client.

poolActLUs

The number of LUs in the pool that
have been activated by the host and
can support a user session.

poolInactLUs

The number of LUs in the pool that
have not been activated by the host
and cannot support a user session.

Table 12-1 Status Table MIB Variables (9 of 9)

Resource

MIB Variable

Description

Summary of Contents for SunLink SNA 9.1 PU2.1











































































































































































































































































































Search results

Summary of Contents for SunLink SNA 9.1 PU2.1

Reviews:

Related manuals for SunLink SNA 9.1 PU2.1

Brands by name

Popular brands

Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Search results

Summary of Contents for SunLink SNA 9.1 PU2.1

Reviews:

Related manuals for SunLink SNA 9.1 PU2.1

Brands by name

Popular brands