Sun Microsystems SunLink SNA 9.1 PU2.1, Configuration Manual

Page: 210 / 298

12-32 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
12
12.2 Error Messages
If an error occurs while you are using the Sun PU2.1 SNA Server, the software
displays an error code. For most error codes, the error message text and
display information is stored in the Sun Message Database (BMD). To use the
bmsg
utility to display the text of messages and any associated user action
information, go to the
/opt/SUNWpu21
directory and enter the following:
% bmsg COMPnnnn
where
COMP is the 4-character message group identifier.
nnnn is the message number.
For example, the following line appears in the event log:
Server Server1 PU200001: Initializing sunPU21 Server
To display information about any actions you should perform, enter the
following:
% bmsg PU200001
12.3 Common Problems
The following sections contain information about common problems that you
may encounter when using the Sun PU2.1 SNA Server.
Sun also provides an updated list of common problems and solutions through
the Internet. Refer to the Sun home page at
http://www.Sun.com
or connect to
the anonymous FTP server at
ftp.Sun.com
and look in the
/pub/documentation
directory for further information.
In addition, with each release of the Sun PU2.1 SNA Server, an updated
version of the release notes is provided. Check the release notes to see whether
a problem you are encountering has been corrected. The release notes are
located in the installation directory (
/opt/SUNWpu21
, by default) and can be
displayed by selecting Release Note from the Help menu.