Sun Microsystems Netra t1 100, User And Administration Manual

Page: 123 / 154

101
A P P E N D I X
A
Installing Additional Memory
This appendix tells you how to add a second memory board to the current memory
board installed in your system or how, alternatively, to install a stack of four 256
Mbyte memory boards into your system.
This appendix contains the following sections:
■
“Installing a Second Memory Board” on page 102
■
“Installing 4 x 256 Mbyte Memory Boards” on page 107
Note –
Do not install memory boards in stacks of three. These boards can only be
installed singly or in stacks of two or four. Only boards of part number 370-4155 can
be installed in stacks of four (see “Installing 4 x 256 Mbyte Memory Boards” on
page 107). In a 2-stack configuration, you can combine Netra t1 memory boards of
different capacities (64, 256, or 512 Mbytes).
Caution – The components on the motherboard and memory boards are extremely
sensitive to static electricity. Wear an anti-static wrist strap connected to an earthing
point during installation. Failure to comply may result in damage to the equipment.
SysAdmin.book Page 101 Friday, March 30, 2001 2:38 PM