Sun Microsystems Netra t1 100, User And Administration Manual

Page: 19 / 154

Preface xix
Modifications to Equipment
Do not make mechanical or electrical modifications to the equipment. Sun
Microsystems is not responsible for the regulatory compliance of a modified
product.
Caution –
Do not block or cover the openings of your Sun product. Never place a
Sun product near a radiator or heat register. Failure to follow these guidelines can
cause overheating and affect the reliability of your Sun product.
Caution –
If your Netra t1 system is installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may exceed
the room ambient temperature. Ensure that rack environment ambient temperature
does not exceed 40 degrees. The system will tolerate ambient temperatures of up to
55 degrees, but these temperatures must not persist for more than 96 hours.
Caution –
Mounting of the equipment in a rack or cabinet should be such that a
hazardous condition is not created due to uneven mechanical loading or weight
distribution.
Caution –
Ensure that the connection of multiple system units to the circuit does
not overload the the supply overcurrent protection or supply wiring. Consider the
Sun agency label electrical ratings when determining the correct branch circuit
rating for your installation.
Caution –
All supply connections, wiring, wire protection, and wire routing must
be made in accordance with applicable sections and requirements of national
electrical code and local electrical authorities.
SysAdmin.book Page xix Friday, March 30, 2001 2:38 PM