Sun Microsystems Netra t1 100, User And Administration Manual

Page: 133 / 154

Appendix A Installing Additional Memory 111
.
FIGURE A-9
Seating a Single Memory Board on the Netra t1’s Motherboard
Caution –
Although it is necessary for the connectors to be properly seated, you
must not apply excessive pressure to them. If you do, you might cause micro-
fractures on the motherboard which can impair the operation of the board.
5. Position the connectors of one memory board (Board C) above the memory board
connector sockets of another memory board (Board B) in a piggy-back style, then
press down the connectors using your thumbs until they are seated.
You might find it helpful to seat the middle connector properly first (see
FIGURE A-10
).
Assemble Boards B and C first, before you connect them to Board A.
Caution – Place the memory boards on ESD foam during this assembly.
Board A
Motherboard
SysAdmin.book Page 111 Friday, March 30, 2001 2:38 PM