Sun Microsystems Netra t1 100, User And Administration Manual

Page: 55 / 154

Chapter 5 Installing the Netra t1 into a Rack 33
▼
To Assemble the Slides and Mount the System
1. Position the two parts of the slide so that the double-angled ear (A) is to the rear.
2. Make sure that the front and rear mounting ears are the correct distance apart, and
loosely secure the two parts together using the M4 nuts supplied (see
FIGURE 5-2
).
FIGURE 5-2
Slide Mounts for Sun 72-inch Expansion Rack
3. Adjust the mount to fit the rack.
4. Move the brackets so that the studs are in suitable slots and tighten the nuts.
5. Fasten the mounting slides to the rack using the screws supplied.
Refer to
FIGURE 5-3
and
FIGURE 5-4
. Leave the screws slightly loose to allow
adjustment when the Netra t1 system is inserted.
A
SysAdmin.book Page 33 Friday, March 30, 2001 2:38 PM