Sun Microsystems Netra t1 100, User And Administration Manual

Page: 41 / 154

Chapter 3 Using DC Power 19
FIGURE 3-6
Routing the Wires Out of the Strain Relief Housing
3. Get the tie wrap and insert it into the bottom portion of the strain relief housing
(see
FIGURE 3-7
).
FIGURE 3-7
Securing the Wires to the Strain Relief Housing
4. Loop the tie wrap over the wires and back out of the strain relief housing and
tighten the tie wrap to secure the wires to the strain relief housing (see
FIGURE 3-7
).
SysAdmin.book Page 19 Friday, March 30, 2001 2:38 PM