Sun Microsystems Netra t1 100, User And Administration Manual

Page: 15 / 154

xv
Preface
This manual tells you how to install, maintain and manage a Netra t1 Model
100/105 server.
How This Book Is Organized
Part I “Installation and Configuration”
Chapter 1 “Before You Begin”
Introduces the Netra t1 Model 100/105 server and tells you what tools to use to
install the system. It also describes the equipment’s tolerance of different
environmental conditions.
Chapter 2 “Operating Power and Cooling”
Provides information about the power and cooling requirements for the Netra t1.
Chapter 3 “Using DC Power”
Tells you the site requirements for using DC power, and also tells you how to
assemble the DC input power cable.
Chapter 4 “Installing Hardware Option Modules”
Tells you how to install optional (hot-pluggable) hard disk drives. The chapter also
tells you how to open the Netra t1, how to identify its component parts, and how to
install a CD-ROM drive.
Chapter 5 “Installing the Netra t1 into a Rack”
Tells you how to install the Netra t1 into different types of rack.
Chapter 6 “Connecting the Cables”
Tells you how to cable up and set up serial connections to the Netra t1.
SysAdmin.book Page xv Friday, March 30, 2001 2:38 PM