Sun Microsystems Netra t1 100, User And Administration Manual

Page: 124 / 154

102 Netra t1 User and Administration Guide • June 2000
Installing a Second Memory Board
This section tells you how to install a second memory board on top of the existing
memory board in your system. The boards you can install in this way are:
■
64 Mbyte memory board (part number: 595-5314; sales part number: X6983A)
■
256 Mbyte memory board (part number: 370-4155; sales part number: X6985A)
■
256 Mbyte memory board (part number: 595-5097; not available for purchase)
■
256 Mbyte memory board (part number: 370-4096; not available for purchase)
■
512 Mbyte memory board (part number: 595-5316; sales part number: X6986A)
Note –
Do not install memory boards in a stack of three. These boards can only be
installed singly or in twos. The 256 Mbyte board with part number 370-4155 is the
only one that can be installed in a stack of four.
Materials and Tools Required
FIGURE A-1
The 2-Stackable Memory Board Kit
The packaging containing your new memory board contains the following (see
FIGURE A-1
):
■
One memory board
■
Four plastic spacers
■
Four short screws
■
Four longer screws
■
Four lock washers
■
Four flat washers
4 round spacers
4 longer screws
Memory board
4 lock washers
4 flat washers
4 short screws
SysAdmin.book Page 102 Friday, March 30, 2001 2:38 PM