Sun Microsystems Netra t1 100, User And Administration Manual

Page: 9 / 154

ix
Figures
FIGURE 3-1
Stripping the Insulation From the Wire 15
FIGURE 3-2
Opening the DC Connector Cage Clamp (Lever Method)
16
FIGURE 3-3
Opening the DC Connector Cage Clamp (Screwdriver Method) 17
FIGURE 3-4
Assembling the DC Input Power Cable
17
FIGURE 3-5
Inserting the Bottom Portion of the Strain Relief Housing 18
FIGURE 3-6
Routing the Wires Out of the Strain Relief Housing
19
FIGURE 3-7
Securing the Wires to the Strain Relief Housing 19
FIGURE 3-8
Assembling the Strain Relief Housing
20
FIGURE 4-1
Inserting Hard Disks into the Drive Bays 22
FIGURE 4-2
Using an Anti-Static Wrist Strap
23
FIGURE 4-3
Removing the Rack Mount Brackets 24
FIGURE 4-4
Removing the Top Cover
25
FIGURE 4-5
The Components of the Netra t1 System 26
FIGURE 4-6
Installing an Internal CD-ROM Drive
27
FIGURE 5-1
Cable Management Bracket 32
FIGURE 5-2
Slide Mounts for Sun 72-inch Expansion Rack
33
FIGURE 5-3
Fixing Slide Mounts into a Sun 72-inch Expansion Rack – Rear View (side panels removed
for clarity)
34
FIGURE 5-4
Fixing Slide Mounts into the Sun 72-inch Expansion Rack – Front View (side panels removed
for clarity)
35
SysAdmin.book Page ix Friday, March 30, 2001 2:38 PM